100W BLDC Planetary Gear Motor, 12V/24V/48V

Get a 100 watt DC planetary gear motor at low cost. It works at 12/24/36/48V power supply. 3000rpm, 0.32Nm rated torque, peak torque up to 0.96Nm and gear ratio 4:1 to 250:1. Planetary gearbox combines with 3 phase brushless DC motor for your electric car and industrial machines.

Features

• 12V, 24V, 36V and 48V DC planetary gear motors are available.
• The planetary gearbox speed ratio is up to 250:1.
• Brushless DC motor with a planetary gearbox has low power consumption, high efficiency and longer battery life.
• The planetary gear motor provides high torque at low speeds.
• It is easy for speed adjustment and reversible direction.
• Power, voltage, speed, shaft, motor length and lead of BLDC planetary gear motor can be customized.

Specifications

Note

• If you would like CAD drawings of the motor and planetary gearbox, please contact us.
• Power, Voltage, Speed, Shaft, Motor Length, and Motor Lead of BLDC Motors can be customized.

Speed-Torque Curve

• Instantaneous maximum torque line
  The maximum torque momentarily impacts the load when the motor is started.
  Beyond this torque, the over-current protection of the driver will cause the motor to stop.
• Short-time operation area
  The motor can run for a short time within this torque range at different speeds.
  If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn.
• Rated operating torque line
  The rated torque of the motor runs at different speeds, and the motor can run for a long time at this torque.
• Continuous operating area
  When the motor rotates at different speeds, it runs continuously in this corresponding zone.

Tips: What are the functions of the planetary gear motor?

• The 12/24/48V planetary gear motor increases the output torque while reducing the speed. The torque output ratio is multiplied by the motor output and the reduction ratio, but it should be noted that the rated torque of the reducer cannot be exceeded.
• The 100W planetary deceleration motor reduces the inertia of the load at the same time, and the reduction of inertia is the square of the reduction ratio. Generally, motors have an inertia value.