High quality brushless DC gear motor rated at 3000 rpm, operating at voltages 24V, 36V, 48V, rated torque 2.39 Nm, the gearbox is sealed and the DC motor is screwed to the gearbox from the inside to ensure longer life and better wear performance.
Basic Specifications
| Model |
BLDC-D5BLD750-24 |
BLDC-D5BLD750-36 |
BLDC-D5BLD750-48 |
| Voltage |
24V |
36V |
48V |
| Rated Current |
39.06A |
26.04A |
19.53A |
| No-load Current |
< 9.2A |
< 8.13A |
< 6.5A |
| Compatible Driver Model |
BLD-100 |
BLD-50 |
| Power |
750W |
| Rated Speed |
3000 rpm |
| No-load Speed |
3300 rpm |
| Rated Torque |
2.39 N.m |
| Peak Torque |
7.16 N.m |
| Weight |
4 kg |
| Protection Grade |
IP54 |
| Motor Lead Length |
300mm |
| Temperature |
0~50℃ |
| Gearbox Model |
2GN□K Enter the gear ratio into the box (□) within the model name |
| Gear Ratio |
3, 5, 7.5, 10, 12.5, 15, 18, 20, 25, 30, 36, 40, 50, 60, 75, 90, 100, 120, 150, 180, 200 |
The allowable torque with a gearbox
| Gear Ratio |
Speed (r/min) |
Allowable Torque (N.m) |
Allowable Torque (kgf.cm) |
| 3 |
1000 |
5.8 |
58.02 |
| 5 |
600 |
9.67 |
96.69 |
| 7.5 |
400 |
14.5 |
145 |
| 10 |
300 |
19.34 |
193.4 |
| 12.5 |
240 |
20 |
200 |
| 15 |
200 |
20 |
200 |
| 18 |
167 |
20 |
200 |
| 20 |
150 |
20 |
200 |
| 25 |
120 |
20 |
200 |
| 30 |
100 |
20 |
200 |
| 36 |
83.33 |
20 |
200 |
| 40 |
75 |
20 |
200 |
| 50 |
60 |
20 |
200 |
| 60 |
50 |
20 |
200 |
| 75 |
40 |
20 |
200 |
| 90 |
33 |
20 |
200 |
| 100 |
30 |
20 |
200 |
| 120 |
25 |
20 |
200 |
| 150 |
20 |
20 |
200 |
| 180 |
17 |
20 |
200 |
| 200 |
15 |
20 |
200 |
|
Line Define
| Power Wire |
Hall Wire |
| Red |
U |
Red |
5V |
| Yellow |
V |
Black |
GND |
| Black |
W |
Hu |
Blue |
| Hv |
Green |
| Hw |
White |
DC Gear Motor Dimension (Unit=mm)
Applications
Tips: What can a 12V brushless DC gear motor do?
12V gear motor provides low speed and high torque output. In some products that require high torque output, when the direct output of the micromotor is not enough, a gear motor is needed to change the output torque.
Brushless DC geared motors are shipped with a fixed gear ratio and still need to work at different speeds in real applications. For miniature DC motors, only the voltage needs to be adjusted. The gear reduction structure consists of gears, shaft, and box. In order to ensure the performance of the gear motor, the box should be rigid enough and heat dissipation.
